HDD Format Size Calculator – See Your Real Usable Drive Capacity

You buy a 1 TB drive, plug it in and Windows shows 931 GB. Nothing is wrong with the drive and nothing has gone missing. Our HDD Format Size Calculator shows you what to expect before you buy, so you can plan capacity around the space you will really have.

Why does a 1 TB drive show less than 1 TB?

Manufacturers use decimal units, where 1 TB is 1,000,000,000,000 bytes. Windows counts in binary, dividing by 1,024 at each step, but still labels the result “GB” or “TB”. Divide 1,000,000,000,000 by 1,073,741,824 and you get 931.3, which is the figure you see.

The drive holds exactly what the label says. The two sides simply use different units. macOS counts in decimal, so the same drive shows as 1 TB on a Mac.

Advertised size and what Windows shows

Advertised capacity

Typically shown in Windows

500 GB

about 465 GB

1 TB

about 931 GB

2 TB

about 1.82 TB

4 TB

about 3.64 TB

8 TB

about 7.28 TB

16 TB

about 14.55 TB

How to calculate formatted drive capacity

  • Enter the advertised capacity of the drive.
  • Select the unit, such as GB or TB.
  • Add any other inputs the calculator asks for.
  • Read the estimated usable capacity.
  • Use that figure, not the label, when you plan storage.

Storage units explained

  • Byte: The basic unit of digital storage
  • Kilobyte (KB): 1,000 bytes
  • Megabyte (MB): 1,000 KB
  • Gigabyte (GB): 1,000 MB
  • Terabyte (TB): 1,000 GB
  • Gibibyte (GiB): 1,024 MiB, the binary unit that Windows actually displays
  • Tebibyte (TiB): 1,024 GiB

Why capacity planning matters

Businesses use hard drives for file servers, surveillance footage, backups and application data. Planning with the label figure is how teams run out of space sooner than expected. Work from the usable figure, add room for growth and avoid running a volume close to full, as that can slow it down and leaves no space to grow.

Frequently asked questions

Because of different unit conventions. The manufacturer counts in decimal and Windows counts in binary, so a 1 TB drive appears as about 931 GB.

Yes, slightly. The file system uses some space for its own structures. How much varies by file system and drive size.

GB is decimal (1,000,000,000 bytes). GiB is binary (1,073,741,824 bytes). Windows shows GiB values but labels them GB.

No. That is the normal result for a 1 TB drive in Windows.

No. Manufacturers use the decimal definition, which is a legitimate standard. It just differs from the way Windows reports it.

Slightly different amounts, yes, but the difference is small. The unit conversion accounts for most of the gap.

Planning a storage upgrade or a new server? Our team can help you size it properly. Speak to an engineer.