ZK SF100
Click to enlarge
Fingertec K Kadex Simple Door Access Readers
Fingertec K Kadex Simple Door Access Readers
Back to products
Fingertec-Face-ID4-Face-Recognition-Readers
FingerTec Face ID4 Face Recognition Readers

ZK SF100 IP Based Fingerprint Access Control & Time Attendance

ZK SF100

Description

ZK SF100 is an IP based fingerprint terminal that works both in-network and standalone modes. It can connect with ZKAccess3.5 software for access control and time attendance management. Wiegand output makes SF100 flexible to connect with ZK or any 3rd party controllers as a slave reader. Additionally, Wiegand input allows two units of SF100 to configure with each other and utilize the Master & Slave solution, which requires user verification at both entrance and exit. The anti-passback function can be used to maximize the security. The Auxiliary input interface allows ZK SF100 to connect with an external source, for instance, a smoke detector or emergency switch.

Read more about using biometric solutions like ZK SF100 here

Chipin offers all other IT solutions and services besides ZK SF100

SKU: 7846c534d03b Category:
Description

Key Features

  • 2.4-inch color display with graphical UI for easy operation
  • Up to 24 user-defined schedules that can be activated on a daily bell alert(Optional).
  • Prompt audio acceptance or rejection signals for valid or invalid fingers.
  • TCP/IP or RS485 communications for various networking environments.
  • Built in auxiliary input with enhanced flexibility to link with wired detector or emergency switch.
  • Supports USB flash drive for offline data management.
  • Up to 15 multi-verification methods to enhance security levels.
  • Duress alarm offers effective protection against duress by threats.
  • Tamper proof switch and multiple alarm outputs.
  • Multi-languages display available on quest.

Related products

ZK F11 Fingerprint

ZK F11 Fingerprint Access Control Reader

ZK F11 Fingerprint is an innovative biometric fingerprint reader for access control applications. Using an advanced algorithm it offers reliability, precision and excellent matching speed. F11 features the fastest commercial-based fingerprint matching algorithm and ZK high-performance,high-image quality optical fingerprint sensor.The user can be enrolled by administrator card when the device works as a standalone access control. The device offers the flexibility to be installed standalone or with any third-party panel that supports 26-bit Wiegand. TCP/IP and RS232/485 are available that the device can be used in different network.Besides offering setup services for communication devices like ZK F11, we also offer all other IT solutions and services
Quick view
ZK F18 Fingerprint
ZK F18 Fingerprint Standalone Access Control and Time Attendance

ZK F18 Fingerprint Standalone Access Control and Time Attendance

The ZK F18 Fingerprint features the fastest commercial-based fingerprint matching algorithm and ZK high-performance, high-image quality infrared detection fingerprint sensor. ZK F18 Fingerprint offers flexibility to be installed standalone or with any third-party access control panels that support standard Wiegand signal. All the operations can be done on the TFT-LCD color screen. The fingerprint image will be displayed on it. That will guide user to put finger on proper position and increase recognition rate.TCP/IP and RS485 are available that the device can be used in different network. Relay outputs for electric lock and alarm. Inputs for door status sensor and exit switch. Supports multiple time zones and personnel groups for programming valid entry zones. The alarm will be triggered when the tamper switch is activated. Internal Proximity Card or Mifare Card reader allows dual factor authentication for access control.Besides offering setup services for communication devices like ZK F18, we also offer all other IT solutions and services
Quick view
ZK F19 Fingerprint Standalone

ZK F19 Fingerprint Standalone Access Control

Using an advanced algorithm for reliability, precision and excellent matching speed F19 offers great performance. ZK F19 is an innovative biometric fingerprint reader for access control application. The device offers flexibility to be installed standalone or with any third-party access control panels, that support standard Wiegand signal. All the operations can be done on the TFT-LCD color screen. The fingerprint image will be displayed on it. That will guide user to put finger on proper position and increase recognition rate. TCP/IP and RS485 are available that the device can be used in different network.Besides offering setup services for devices like ZK F19, we also offer all other IT solutions and services 
Quick view
ZK iFace 302

ZK iFace 302 Multi-biometric Identification Time Attendance & Access Control Term

ZK iFace 302 multi-biometric identification Time & Attendance and Access Control Terminal adopts ZKTeco’s latest platform with ZK iFace 302 algorithm and large capacity memory. With the upgraded hardware, it can now store up to 1200 face templates. It Integrates with 800MHz high speed ZK Multi-Bio processor and high definition infrared camera which enables user identification in the dark environment. Face and fingerprint multi-biometric identification methods make it more applicable. Multi-model communications consisting of RS232/485, TCP/IP and Wi-Fi/GPRS (optional) allow an extremely easy data management. Optional built-in 2000 mAh battery eliminates the trouble of power failure.Besides offering setup services for devices like ZK iFace 302, we also offer all other IT solutions and services 
Quick view
ZK iFace402 Multi-biometric Identification

ZK iFace402 Multi-biometric Identification Time Attendance & Access Control Terminal

With a modern stylish design, it combines Facial, Fingerprint, RFID and PIN recognition. ZK iFace402 Multi-biometric Identification is Equipped with our latest facial identification algorithm, it captures the relative position, size and shape of user’s eyes, nose, cheekbones and jaw features. These feature templates are used to match feature data when users register on the terminal, converting the captured features into value and comparing these to eliminate variance.

ZK iFace402 series

The ZK iFace402 series integrated 630MHz high speed ZK Multi- io processor and high-definition infrared camera allows user identification in dark environments. Ideal for Time and Attendance Management, this series can operate on standalone mode, and also offers simple access control features, providing a complete easy-to-use system for small to medium installations.Besides offering setup services for communication devices like ZK iFace402, we also offer all other IT solutions and services
Quick view
ZK iFace900

ZK iFace900 Multi-biometric Identification Time Attendance & Access Control Terminal

ZK iFace900

ZK iFace900 is a Multi-Biometric Time & Attendance and Access Control Terminal which supports 3,000 face templates, 2,000 fingerprint templates and 10,000 cards (optional). It is equipped with ZKTeco latest hardware platform and algorithm, which provide clients with a brand-new UI and user-friendly operating interface, bringing them a smooth using experience. With the advanced face algorithm and multi-biometric verification technology, the terminal's security level of verification is greatly enhanced. Advanced face algorithm and multi-biometric verification technology.Learn on why to use a bio metric system in your office?
Quick view
ZK S1000 Fingerprint Time

ZK S1000 Fingerprint Time & Attendance Terminal

The ZK S1000 is a 4.3-inch touch screen Time Attendance Terminal with elegant design and professional surface treatment. This device is able to support Wi-Fi, GPRS, 3G, and features 20000 fingerprints capacity, especially applicable for some projects in time attendance.Besides offering setup services for communication devices like ZK S1000 Fingerprint Time, we also offer all other IT solutions and services
Quick view
ZK SF300
ZK SF300 IP Based Fingerprint Access Control

ZK SF300 IP Based Fingerprint Access Control & Time Attendance

The ZK SF300 is an IP based fingerprint terminal, which operate in both network mode and standalone mode. It can connect with ZKAccess3.5 software for access control and time attendance management. Wiegand output makes ZK SF300 flexible to connect with ZK or any 3rd party controllers as a slave reader. Additionally, Wiegand input allows two units of SF300 to configure with each other and utilize Master & Slave solution, which requires user verification at both entrance and exit.Auxiliary input interface allows SF300 to connect with an external source, for instance, a smoke detector or emergency switch. Once the linkage function is enabled through the machine menu, the device would generate an alarm signal and open the door in case of emergency.Learn on why to use a bio metric system in your office?
Quick view